Introduction of micro air station
Miniature ambient air quality monitoring system is mainly used for real-time online monitoring of air pollutant concentration in the atmosphere.
Powered by a pneumatic flow pump, this equipment delivers significantly higher pressure than conventional fans. Its large-particle dust-resistant chamber features a straight-through design that prevents dust accumulation during prolonged operation, ensuring superior stability compared to standard models while maintaining excellent data consistency. The system also incorporates an automatic dehumidification mechanism to eliminate rain mist interference, effectively preventing PM value spikes during rainy or foggy weather.
Real-time data, historical data and export data can be viewed in the app and cloud platform, and it also has 24-hour continuous monitoring, exceeding standard alarm and data storage functions.
Product features
• Real-time continuous monitoring of conventional air pollutants (SO2, NO2, CO, O3, PM2.5 and PM10), modular design, expandable meteorological monitoring factors, suitable for large-scale grid distribution;
• The instrument can be calibrated according to the standard gas, or it can be calibrated by comparing with the standard air station;
• Select imported high precision four electrode sensor;
• Without the need to replace the sampling cutter, PM10 and PM2.5 mass concentration can be measured at the same time;
• The circuit uses industrial-grade embedded processor, which can be suitable for harsh outdoor environment;
• High precision ADC data acquisition system, can monitor pollutant level of ppb;
• The sampling of particulate matter is controlled by dynamic heating and dehumidification to remove the influence of water mist on the measurement data;
• Using long life anti-interference sampling power system, quiet and efficient; sampling cycle can be adjusted;
• Select industrial-grade data transmission module. Data transmission is stable and reliable;
• Real-time field data shows: terminal meter data update time can be adjusted;
• Various parameter IP cameras can be selected to ensure the requirements of night and visual distance shooting, which can be automatically captured or provided for real-time viewing by users;
Test parameter table
Test parameters |
Detection range |
Detection accuracy |
Resolution ratio |
Detection principle |
PM2.5 |
0-1000ug/m3 |
10% |
1 μg/m3 |
Light scattering method |
PM10 |
0-2000ug/m3 |
10% |
1 μg/m3 |
Light scattering method |
Carbon monoxide |
0-50ppm |
3% |
0.001ppm |
Electrochemistry |
Sulfur dioxide |
0-500ppb |
3% |
1 ppb |
Electrochemistry |
Nitrogen dioxide |
0-500ppb |
3% |
1 ppb |
Electrochemistry |
Ozone |
0-500ppb |
3% |
1 ppb |
Electrochemistry |
TVOC |
0-50ppm |
3% |
0.001ppm |
Photoionization method |
Temperature |
-20~60℃ |
0.3% |
0.1℃ |
Capacitance |
Humidity |
0-100%RH |
2% |
1% |
Capacitance |
More gas types can be consulted/customized according to actual conditions |
Technical parameter of micro air station
Power input |
220AC |
Output signal |
GPRS |
Response time |
<60 seconds |
Working temperature |
-10~60℃ |
Sample mode |
Pneumatic type |
Working humidity |
0-95% RH (non-condensable) |
Communication mode |
RS485 WIFI 4G |
Zero drift |
<3% |
Linear error |
<2% |
Way to install |
Upright column |
Pillar dimensions |
3m poles and 1.5m poles are available |
Shell material |
Metal plate |
Installation environment |
Open outdoor area |
Life length |
Sensors (1 year), instruments (5 years) |
LED screen size |
100×55×8cm |
Computer case size |
45×34×22cm |
Levels of protection |
IP65TVS8000V protection against lightning, surge and spike |